Time to digital converter (TDC)

LogicPool (TDC)

This module is a software implementation, no need of hardware to work. The TDC will capture the time stamp of the input channels by rising edge so long the gate is activated. The maximal time resolution is 10 ns and can be changed through a programmable register, an external signal can be used as TDC clock too.

Models

There is only one model for this module.

CBUS Address

Supported Hardware

SU7XX Just a link to the hardware module if any

Register Map

Module Address: 'T' or Ox??

Read register

Read registers

Register Address	Name	Data
0	MUX_IN	Bit 7..0: multiplexer address
1	STATE_IN	Bit 7..0: input value

Write register

Write registers

Register Address	Name	Data
0	MUX_OUT	Bit 7..0: multiplexer address
1	Debounce	Bit 7..0: input value
2	Mode	Bit 0: '1' 50 Ohm termination '0' Open Bit 1: NIM/TTL '1' NIM '0' TTL

Read/Write register

Read/Write registers

Register Address	Name	Data
0	MUX_IN	Bit 7..0: multiplexer address
1	STATE_IN	Bit 7..0: input value

LabVIEW Vi

Inputs

 Input 1: 
 Input 2:

Outputs

 Output 1: 
 Output 2:

Parameters

 Param 1: 
 Param 2:

Functions

 Function 1: 
 Function 2: