LP module
Contents
LogicPool (QDC)
A brief introduction: This VHDL module needs a SU7XX hardware sub-module to work....
This module is software implementation, no need of hardware to work.....
Models
There is only one model for this module.
Supported Hardware
SU7XX Just a link to the hardware module if any
Register Map
Module Address: 'T' or Ox??
Read register
| Register Address | Name | Data |
|---|---|---|
| 0 | MUX_IN | Bit 7..0: multiplexer address |
| 1 | STATE_IN | Bit 7..0: input value |
Write register
| Register Address | Name | Data |
|---|---|---|
| 0 | MUX_OUT | Bit 7..0: multiplexer address |
| 1 | Debounce | Bit 7..0: input value |
| 2 | Mode | Bit 0:
'1' 50 Ohm termination '0' Open Bit 1: NIM/TTL '1' NIM '0' TTL |
Read/Write register
| Register Address | Name | Data |
|---|---|---|
| 0 | MUX_IN | Bit 7..0: multiplexer address |
| 1 | STATE_IN | Bit 7..0: input value |
LabVIEW Vi
Inputs
Input 1: Input 2:
Outputs
Output 1: Output 2:
Parameters
Param 1: Param 2:
Functions
Function 1: Function 2:
