SU710
Contents
Description
Dual channel 10/12/14-Bit Digital to analog converter. As DAC was used the DAC2904 from Texas Instruments. It can operate with high update rates of up to 125MSPS. Each DAC has a high-impedance differential-current output suitable for single-ended or differential analog-output configurations.
The SU710 can be used as voltage or current driver. The DAC2904 can drive 50 Ohm loads with up to 20 mA. An output buffer for each channel can be populated, the LMH6702 was used.
Block Diagram
Version 2
Front panel
Version 2
| Pos (top view) | Name | Type | Qty. | Dir. | Function |
|---|---|---|---|---|---|
| 1 LEFT/RIGHT/MIDDLE | Analog input | LEMO connector | 1x | input | Detector input |
| 2 LEFT/RIGHT/MIDDLE | DIO | LEMO connector | 1x | input/output | Digital input/output (LVTTL) |
Back Connector
Version 2
SU710 pin table (direction shown for the SU board!)
power in +5V 2 1 +5V in power
LVTTL in DATA1<0> 4 3 DATA1<1> in LVTTL
LVTTL in DATA1<2> 6 5 DATA1<3> in LVTTL
LVTTL in DATA1<4> 8 7 DATA1<5> in LVTTL
LVTTL in DATA1<6> 10 9 DATA1<7> in LVTTL
LVTTL in DATA1<8> 12 11 DATA1<9> in LVTTL
LVTTL in DATA1<10> 14 13 DATA1<11> in LVTTL
LVTTL in DATA1<12> 16 15 DATA1<13> in LVTTL
LVTTL in LOAD2 18 17 LOAD1 in LVTTL
LVTTL in DATA2<0> 20 19 DATA2<1> in LVTTL
LVTTL in DATA2<2> 22 21 DATA2<3> in LVTTL
LVTTL in DATA2<4> 24 23 DATA2<5> in LVTTL
LVTTL in DATA2<6> 26 25 DATA2<7> in LVTTL
LVTTL in DATA2<8> 28 27 DATA2<9> in LVTTL
LVTTL in DATA2<10> 30 29 DATA2<11> in LVTTL
LVTTL in DATA2<12> 32 31 DATA2<13> in LVTTL
NC - - 34 33 - - NC
power in GND 36 35 GND in power
Power consumption
Version 2
+5V -> XX mA -5V -> XX mA
