Time to digital converter (TDC)
Contents
LogicPool (TDC)
This module is a software implementation, no need of hardware to work. The TDC will capture the time stamp of the input channels by rising edge so long the gate is activated. The maximal time resolution is 10 ns and can be changed through a programmable divider, an external signal can be used as TDC clock too.
This module has a bus interface to connect with a FIFO, in this FIFO will be written the channel and time information of each rising edge, so long the gate is active. The number of channels and length of the time stamp counters depends on the selected model.
During the gate a package will be written in the FIFO. This package can consists of a Start of gate marker, 0 to N events marker and a stop of gate marker.
Models
At this time there are two models. The model 0 has only one event channel and the model 1 8 event channels. The event marker are different for each model. The model 0 event marker is a 32-bits time information and the model 1 event marker consist of 8-Bit channel mask to indicate which channels has been toggle and 24-bit with the time stamp
| Event | Channel info (bits 31..24) | Time stamp (bits 23..0) | Explanation |
|---|---|---|---|
| SOG | 0x00 | 0x000000 | SOG = start of gate, time stamp will be always 0 and no active channels |
| E1 | 0x01 | 0x000064 | detected a rising edge on channel 0 100 CLKs after the SOG |
| E2 | 0x03 | 0x000080 | detected a rising edge on channel 0 and 1 128 CLKs after the SOG |
| E3 | 0x00 | 0xFFFFFF | time stamp counter overflow |
| E4 | 0x80 | 0x0001FF | detected a rising edge on channel 7 16777215+511 CLKs after the SOG |
| EOG | 0x00 | 0x0003FF | EOG = end of gate, no active channels and time stamp must be non zero |
Register Map Model 0
Module Address: 'B' or Ox42
Read register
| Register Address | Name | Data |
|---|---|---|
| 0 | MUX_IN | Bit 7..0: multiplexer address |
| 1 | EVENT MARKER | Bit 31..0: current event information |
Write register
| Register Address | Name | Data |
|---|---|---|
| 0 | MUX_GATE | Bit 7..0: gate multiplexer address |
| 1 | MUX_CLOCK | Bit 7..0: clock multiplexer address |
| 2 | CLOCK_DIVIDER | Bit 31..0: |
| 3 | MUX_EVENT_CHANNEL | Bit 7..0: event channel multiplexer address |
Register Map Model 0
Module Address: 'B' or Ox42
Read register
| Register Address | Name | Data |
|---|---|---|
| 0 | MUX_IN | Bit 7..0: multiplexer address |
| 1 | EVENT MARKER | Bit 31..0: current event information |
Write register
| Register Address | Name | Data |
|---|---|---|
| 0 | MUX_GATE | Bit 7..0: gate multiplexer address |
| 1 | MUX_CLOCK | Bit 7..0: clock multiplexer address |
| 2 | CLOCK_DIVIDER | Bit 31..0: |
| 3 | MUX_EVENT_CHANNEL | Bit 7..0: event channel multiplexer address |
LabVIEW Vi
Inputs
Input 1: Input 2:
Outputs
Output 1: Output 2:
Parameters
Param 1: Param 2:
Functions
Function 1: Function 2:
