Difference between revisions of "Submodules"

From LogicBox
Jump to: navigation, search
(→‎Digital inputs and outputs)
 
(83 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
= Function =
 
= Function =
  
−
== Digital inputs and outputs ==
+
== Digital inputs and outputs (I/O) ==
  
−
SU700 5 channel TTL I/O  
+
[[SU700]] 5 channel TTL I/O  
−
SU701 TTL I/O 16 channels in two groups
 
−
SU704 5 channel TTL or NIM I/O
 
−
SU707 8 channel LVDS I/O
 
−
SU722 5 channel TTL I/O, like SU700 but with isolation
 
−
SU725 8 channel ECL input
 
  
−
== Digital to analog converter ==
+
[[SU722]] 5 channel TTL I/O, like SU700 but with isolation
 +
 
 +
[[SU701]] 16 channels TTL I/O in two groups
 +
 
 +
[[SU704]] [[SU751]] 5 channel TTL or NIM I/O
 +
 
 +
[[SU707]] 8 channel LVDS I/O
 +
 
 +
[[SU725]] 8 channel ECL input
 +
 
 +
[[SU751]] 5 channel, each of them can be TTL, NIM, LVDS, ECL, Discriminator, DAC, ADC, DDS, some of them isolated. Compatible to [[SU704]] for TTL and NIM.
 +
 
 +
[[SU753]] 2+8 channel digital outputs with output voltage up to 32(2)/36(8) V
 +
 
 +
== Digital to analog converter (DAC)==
 +
 
 +
=== Slow DACs ===
 +
 
 +
[[SU713]] Dual 8 channel 14-bit DAC
 +
 
 +
[[SU721]] Dual 8 channel 14-bit DAC, like SU713 but with isolation
 +
 
 +
[[SU730]] 2 channel 12/14/16-bit isolated DAC and integrated PSRAM 8M x 16 bit
 +
 
 +
[[SU741]] 8 channel 12/14/16-bit isolated DAC with programmable range 5V, 10V, +/-5V, +/-10V and integrated PSRAM 4M x 16 bit
 +
 
 +
=== Fast DACs ===
 +
 
 +
[[SU710]] 2 channel 14-bit DAC, 100MSPS, current output (0..20 mA) or voltage (+/-2V)
 +
 
 +
[[SU728]] 16-bit ADC and DAC
 +
 
 +
== Analog to digital converter (ADC)==
 +
 
 +
=== Slow ADCs ===
 +
 
 +
[[SU702]] 8 channel 14-bit ADC (MAX1149) with input amplifier for each channel.
 +
 
 +
[[SU712]] 2x8 channel 14-bit ADC (MAX1149), like SU720 but without isolation. Reference voltage 2.5V. Without input amplifier and resistor divider. Unipolar/Bipolar selectable by a jumper in groups of 8 channels. Differential voltage using two inputs.
 +
 
 +
[[SU720]] 2x8 channel 14-bit ADC (MAX1149), like SU712 but with isolation. Reference voltage 2.5V. Without input amplifier and resistor divider. Unipolar/Bipolar selectable by a jumper in groups of 8 channels. Differential voltage using two inputs.
 +
 
 +
[[SU728]] 16-bit ADC and DAC
 +
 
 +
[[SU740]] Low current integrator with comparators and ADC
 +
 
 +
[[SU743]] 8 channel 14-bit ADC (MAX1149) with isolation and input amplifier + resistor divider for each channel. Reference voltage 2.5V. Unipolar/Bipolar selectable by a jumper for each channel. Differential voltage using only one input.
 +
 
 +
[[SU755]] 8 channel simultaneous sampling S/D ADC AD7768
 +
 
 +
=== Fast ADCs ===
 +
 
 +
[[SU706]] 100 MS/s 14-bit ADC (ADS5500)
 +
 
 +
[[SU735]] 100 MS/s 14-bit ADC
 +
 
 +
[[SU750]] 250 MS/s 14-bit ADC
 +
 
 +
== Interfaces ==
 +
 
 +
[[SU724]] Toslink Interface
 +
 
 +
[[SU727]] Toslink Interface
 +
 
 +
[[SU733]] Optical In/Out with uController XMega
 +
 
 +
[[SU737]] Optical 1.25 Gbps Gigabit Ethernet with TLK2201 (SerDes) and SFP Module
 +
 
 +
[[SU738]] Optical 2.5 Gbps link with TLK2501 (SerDes) and SFP Module
 +
 
 +
[[SU739]] USB2.0 High Speed Interface
 +
 
 +
[[SU747]] Interface module to IF025 (Ethernet Mux) - only prototype
 +
 
 +
[[SU748]] USB3.0 Interface 32Bit (dual board)
 +
 
 +
[[SU749]] USB3.0 Interface 16Bit
 +
 
 +
== Memory ==
 +
 
 +
 
 +
[[SU705]] 4M x 16-bit RAM
 +
 
 +
[[SU716]] 16M x 32-bit RAM
 +
 
 +
[[SU730]] PSRAM 8M x 16 bit
 +
 
 +
== Discriminator, Comparators ==
 +
 
 +
There are two discriminator sub-modules.
 +
 
 +
The SU703 has 4 input analogue channels. The threshold and hysteresis voltage must be set through a DAC (MAX537). The discriminator output go to the back connector. This module has 4 LEDs too. All four analogue channels or a part of it can be used as TTL digital input/output. The threshold of the first channel can be set through the DAC or a Lemo connector, in this fall a solder jumper must be set.
 +
 
 +
The SU736 has two analogue input channels and two digital NIM output channels connected with the discriminator/comparator output. The threshold and hysteresis voltage must can be set through a DAC (MAX537) or through potentiometers, the user can select it with the help of smd solder jumpers.
 +
 
 +
{| border="1" class="wikitable"
 +
|+ Comparasion SU703/SU736
 +
!
 +
! Analogue Ch.!! Thress/Step !! Hyste/Step !! TTL IOs !! NIM Out !! LEDs !! Power
 +
|-
 +
! SU703
 +
| 4 || -2,5..+2,5V/1,22mV || 0..2,5V/0,61mV || 4 || 0 || 4 || +5V
 +
|-
 +
! SU736
 +
| 2 || -2,5..+2,5V/1,22mV || 0..2,5V/0,61mV || 0 || 2 || 4 || +5V and -6V
 +
|}
 +
 
 +
 
 +
[[SU703]] 4 channel fast dicriminator with 2xMAX9601 (dual PECL comparator) + 2xMAX537 (4x serial DAC)
 +
 
 +
[[SU736]] 2 channel fast dicriminator with programmable threshold & hysteresis and direct NIM outputs (1xMAX9600 dual ECL comparator + MAX537 4x serial DAC)
 +
 
 +
== Charge to digital converter (QDC) ==
 +
 
 +
[[SU717]] Gated integrator with ADS5500
 +
 
 +
[[SU735]] 100 MS/s 14-bit ADC
 +
 
 +
[[SU740]] Low current integrator with comparators and ADC
  
 
= Name =
 
= Name =
  
−
SU700 5 channel TTL I/O
+
== All modules ==
−
SU701 TTL I/O 16 channels in two groups
+
 
−
SU702 8 channel 14-bit ADC (MAX1149)
+
[[SU700]] 5 channel TTL I/O
 +
 
 +
[[SU701]] TTL I/O 16 channels in two groups  
 +
 
 +
[[SU702]] 8 channel 14-bit ADC (MAX1149) with input amplifier for each channel.
 +
 
 +
[[SU703]] 4 channel fast dicriminator with 2xMAX9601 (dual PECL comparator) + 2xMAX537 (4x serial DAC)
 +
 
 +
[[SU704]] 5 channel TTL or NIM I/O
 +
 
 +
[[SU705]] 4M x 16-bit RAM
 +
 
 +
[[SU706]] 100 MS/s 14-bit ADC (ADS5500)
 +
 
 +
[[SU707]] 8 channel LVDS I/O
 +
 
 +
[[SU709]] 8 temperature sensors SMT160-30 / HY-LINE #16092
 +
 
 +
[[SU710]] 2 channel 14-bit DAC, 100 MHz sampling rate, current output (0..20 mA) or voltage (+/-2V)
 +
 
 +
[[SU711]] Delay
 +
 
 +
[[SU712]] Dual 8 channel 14-bit ADC (MAX1149), like SU720 but without isolation
 +
 
 +
[[SU713]] Dual 8 channel 14-bit DAC
 +
 
 +
[[SU714]] ADC ADS5500
 +
 
 +
[[SU715]] 2 channel audio preamplifier
 +
 
 +
[[SU716]] 16M x 32-bit RAM
 +
 
 +
[[SU717]] Gated integrator with ADS5500
 +
 
 +
[[SU720]] 2x8 channel 14-bit ADC (MAX1149), like SU712 but with isolation
 +
 
 +
[[SU721]] 2x8 channel 14-bit DAC, like SU713 but with isolation
 +
 
 +
[[SU722]] 5 channel TTL I/O, like SU700 but with isolation
 +
 
 +
[[SU724]] Toslink interface
 +
 
 +
[[SU725]] 8 channel ECL input
 +
 
 +
[[SU726]] 32 LEDs
 +
 
 +
[[SU727]] Toslink interface
 +
 
 +
[[SU728]] 16-bit ADC and DAC
  
−
SU703 4 channel fast dicriminator with 2xMAX9601 (dual PECL comparator) + 2xMAX537 (4x serial DAC)
+
[[SU730]] PSRAM 8M x 16 bit
  
−
SU704 5 channel TTL or NIM I/O
+
[[SU731]] 4 x H-Bridge, 36V 2A
  
−
SU705 4M x 16-bit RAM
+
[[SU733]] Optical In/Out with uController XMega
  
−
SU706 100 MS/s 14-bit ADC (ADS5500)
+
[[SU734]] DDS Modul with AD9910
  
−
SU707 8 channel LVDS I/O
+
[[SU735]] 100 MS/s 14-bit ADC
  
−
SU708 IF50 Interface
+
[[SU736]] 2 channel fast dicriminator with programmable threshold & hysteresis and direct NIM outputs (1xMAX9600 dual ECL comparator + MAX537 4x serial DAC)
  
−
SU709 8 temperature sensors SMT160-30 / HY-LINE #16092
+
[[SU737]] Optical 1.25 Gbps Gigabit Ethernet with TLK2201 (SerDes) and SFP Module
  
−
SU710 2 channel 14-bit DAC
+
[[SU738]] Optical 2.5 Gbps link with TLK2501 (SerDes) and SFP Module
  
−
SU711 Delay
+
[[SU739]] USB2.0 High Speed Interface
  
−
SU712 Dual 8 channel 14-bit ADC (MAX1149), like SU720 but without isolation
+
[[SU740]] Low current integrator with comparators and ADC
  
−
SU713 Dual 8 channel 14-bit DAC
+
[[SU741]] 8 channel up to 16-bit isolated DAC with programmable range 5V, 10V, +/-5V, +/-10V and integrated PSRAM 4M x 16 bit
  
−
SU714 ADC ADS5500
+
[[SU743]] 8 channel 14-bit ADC (MAX1149) with isolation with input amplifier for each channel.
  
−
SU715 2 channel audio preamplifier
+
[[SU744]] Pulse stretcher for multichannel pulse high analyzer (IKP-Koeln)
  
−
SU716 16M x 32-bit RAM
+
[[SU745]] Analog multiplier
  
−
SU717 Gated integrator with ADS5500
+
[[SU746]] HF-switch
  
−
SU720 Dual 8 channel 14-bit ADC (MAX1149), like SU712 but with isolation
+
[[SU747]] Interface module to IF025 (Ethernet Mux) - only prototype
  
−
SU721 Dual 8 channel 14-bit DAC, like SU713 but with isolation
+
[[SU748]] USB3.0 Interface 32Bit (dual board)
  
−
SU722 5 channel TTL I/O, like SU700 but with isolation
+
[[SU749]] USB3.0 Interface 16Bit 
  
−
SU724 Toslink interface
+
[[SU750]] 250 MS/s 14-bit ADC
  
−
SU725 8 channel ECL input
+
[[SU751]] 5 channel, each of them can be TTL, NIM, LVDS, ECL, Discriminator, DAC, ADC, DDS, some of them isolated. Compatible to [[SU704]] for TTL and NIM.
  
−
SU726 32 LEDs
+
[[SU753]] 2+8 channel digital outputs with output voltage up to 32(2)/36(8) V
  
−
SU727 Toslink interface
+
[[SU755]] 8 channel simultaneous sampling S/D ADC AD7768
  
−
SU728 16-bit ADC and DAC
+
== Custom modules ==
  
−
SU730 PSRAM 8M x 16 bit
+
[[SU708]] IF50 Interface
  
−
SU731 4 x H-Bridge, 36V 2A
+
= More information =
  
−
SU733 Optical In/Out
+
[[Table with the number of IOs used in the SU boards]]
  
−
SU734 DDS Modul with AD9910
+
[[SU9xx on an Adapter plugged in DL709]]
  
−
SU735 100 MS/s 14-bit ADC
+
= Templates =
  
−
SU736 2 channel fast dicriminator with programmable threshold & hysteresis and direct NIM outputs (1xMAX9600 dual ECL comparator + MAX537 4x serial DAC)
+
[[SU7XX]]
  
−
SU737 Optical Gigabit Ethernet with TLK2201 (SerDes) and SFP Module
+
[[LP_module]]

Latest revision as of 12:33, 25 March 2020

Function

Digital inputs and outputs (I/O)

SU700 5 channel TTL I/O

SU722 5 channel TTL I/O, like SU700 but with isolation

SU701 16 channels TTL I/O in two groups

SU704 SU751 5 channel TTL or NIM I/O

SU707 8 channel LVDS I/O

SU725 8 channel ECL input

SU751 5 channel, each of them can be TTL, NIM, LVDS, ECL, Discriminator, DAC, ADC, DDS, some of them isolated. Compatible to SU704 for TTL and NIM.

SU753 2+8 channel digital outputs with output voltage up to 32(2)/36(8) V

Digital to analog converter (DAC)

Slow DACs

SU713 Dual 8 channel 14-bit DAC

SU721 Dual 8 channel 14-bit DAC, like SU713 but with isolation

SU730 2 channel 12/14/16-bit isolated DAC and integrated PSRAM 8M x 16 bit

SU741 8 channel 12/14/16-bit isolated DAC with programmable range 5V, 10V, +/-5V, +/-10V and integrated PSRAM 4M x 16 bit

Fast DACs

SU710 2 channel 14-bit DAC, 100MSPS, current output (0..20 mA) or voltage (+/-2V)

SU728 16-bit ADC and DAC

Analog to digital converter (ADC)

Slow ADCs

SU702 8 channel 14-bit ADC (MAX1149) with input amplifier for each channel.

SU712 2x8 channel 14-bit ADC (MAX1149), like SU720 but without isolation. Reference voltage 2.5V. Without input amplifier and resistor divider. Unipolar/Bipolar selectable by a jumper in groups of 8 channels. Differential voltage using two inputs.

SU720 2x8 channel 14-bit ADC (MAX1149), like SU712 but with isolation. Reference voltage 2.5V. Without input amplifier and resistor divider. Unipolar/Bipolar selectable by a jumper in groups of 8 channels. Differential voltage using two inputs.

SU728 16-bit ADC and DAC

SU740 Low current integrator with comparators and ADC

SU743 8 channel 14-bit ADC (MAX1149) with isolation and input amplifier + resistor divider for each channel. Reference voltage 2.5V. Unipolar/Bipolar selectable by a jumper for each channel. Differential voltage using only one input.

SU755 8 channel simultaneous sampling S/D ADC AD7768

Fast ADCs

SU706 100 MS/s 14-bit ADC (ADS5500)

SU735 100 MS/s 14-bit ADC

SU750 250 MS/s 14-bit ADC

Interfaces

SU724 Toslink Interface

SU727 Toslink Interface

SU733 Optical In/Out with uController XMega

SU737 Optical 1.25 Gbps Gigabit Ethernet with TLK2201 (SerDes) and SFP Module

SU738 Optical 2.5 Gbps link with TLK2501 (SerDes) and SFP Module

SU739 USB2.0 High Speed Interface

SU747 Interface module to IF025 (Ethernet Mux) - only prototype

SU748 USB3.0 Interface 32Bit (dual board)

SU749 USB3.0 Interface 16Bit

Memory

SU705 4M x 16-bit RAM

SU716 16M x 32-bit RAM

SU730 PSRAM 8M x 16 bit

Discriminator, Comparators

There are two discriminator sub-modules.

The SU703 has 4 input analogue channels. The threshold and hysteresis voltage must be set through a DAC (MAX537). The discriminator output go to the back connector. This module has 4 LEDs too. All four analogue channels or a part of it can be used as TTL digital input/output. The threshold of the first channel can be set through the DAC or a Lemo connector, in this fall a solder jumper must be set.

The SU736 has two analogue input channels and two digital NIM output channels connected with the discriminator/comparator output. The threshold and hysteresis voltage must can be set through a DAC (MAX537) or through potentiometers, the user can select it with the help of smd solder jumpers.

Comparasion SU703/SU736
Analogue Ch. Thress/Step Hyste/Step TTL IOs NIM Out LEDs Power
SU703 4 -2,5..+2,5V/1,22mV 0..2,5V/0,61mV 4 0 4 +5V
SU736 2 -2,5..+2,5V/1,22mV 0..2,5V/0,61mV 0 2 4 +5V and -6V


SU703 4 channel fast dicriminator with 2xMAX9601 (dual PECL comparator) + 2xMAX537 (4x serial DAC)

SU736 2 channel fast dicriminator with programmable threshold & hysteresis and direct NIM outputs (1xMAX9600 dual ECL comparator + MAX537 4x serial DAC)

Charge to digital converter (QDC)

SU717 Gated integrator with ADS5500

SU735 100 MS/s 14-bit ADC

SU740 Low current integrator with comparators and ADC

Name

All modules

SU700 5 channel TTL I/O

SU701 TTL I/O 16 channels in two groups

SU702 8 channel 14-bit ADC (MAX1149) with input amplifier for each channel.

SU703 4 channel fast dicriminator with 2xMAX9601 (dual PECL comparator) + 2xMAX537 (4x serial DAC)

SU704 5 channel TTL or NIM I/O

SU705 4M x 16-bit RAM

SU706 100 MS/s 14-bit ADC (ADS5500)

SU707 8 channel LVDS I/O

SU709 8 temperature sensors SMT160-30 / HY-LINE #16092

SU710 2 channel 14-bit DAC, 100 MHz sampling rate, current output (0..20 mA) or voltage (+/-2V)

SU711 Delay

SU712 Dual 8 channel 14-bit ADC (MAX1149), like SU720 but without isolation

SU713 Dual 8 channel 14-bit DAC

SU714 ADC ADS5500

SU715 2 channel audio preamplifier

SU716 16M x 32-bit RAM

SU717 Gated integrator with ADS5500

SU720 2x8 channel 14-bit ADC (MAX1149), like SU712 but with isolation

SU721 2x8 channel 14-bit DAC, like SU713 but with isolation

SU722 5 channel TTL I/O, like SU700 but with isolation

SU724 Toslink interface

SU725 8 channel ECL input

SU726 32 LEDs

SU727 Toslink interface

SU728 16-bit ADC and DAC

SU730 PSRAM 8M x 16 bit

SU731 4 x H-Bridge, 36V 2A

SU733 Optical In/Out with uController XMega

SU734 DDS Modul with AD9910

SU735 100 MS/s 14-bit ADC

SU736 2 channel fast dicriminator with programmable threshold & hysteresis and direct NIM outputs (1xMAX9600 dual ECL comparator + MAX537 4x serial DAC)

SU737 Optical 1.25 Gbps Gigabit Ethernet with TLK2201 (SerDes) and SFP Module

SU738 Optical 2.5 Gbps link with TLK2501 (SerDes) and SFP Module

SU739 USB2.0 High Speed Interface

SU740 Low current integrator with comparators and ADC

SU741 8 channel up to 16-bit isolated DAC with programmable range 5V, 10V, +/-5V, +/-10V and integrated PSRAM 4M x 16 bit

SU743 8 channel 14-bit ADC (MAX1149) with isolation with input amplifier for each channel.

SU744 Pulse stretcher for multichannel pulse high analyzer (IKP-Koeln)

SU745 Analog multiplier

SU746 HF-switch

SU747 Interface module to IF025 (Ethernet Mux) - only prototype

SU748 USB3.0 Interface 32Bit (dual board)

SU749 USB3.0 Interface 16Bit

SU750 250 MS/s 14-bit ADC

SU751 5 channel, each of them can be TTL, NIM, LVDS, ECL, Discriminator, DAC, ADC, DDS, some of them isolated. Compatible to SU704 for TTL and NIM.

SU753 2+8 channel digital outputs with output voltage up to 32(2)/36(8) V

SU755 8 channel simultaneous sampling S/D ADC AD7768

Custom modules

SU708 IF50 Interface

More information

Table with the number of IOs used in the SU boards

SU9xx on an Adapter plugged in DL709

Templates

SU7XX

LP_module

Retrieved from "https://ew-dev.physi.uni-heidelberg.de/~rubio/LogicBox/index.php?title=Submodules&oldid=1546"